Rapid Room Cleanroom with optional Installation and Validation

• Free standing “Rapid Room” self-assembly cleanroom


• ISO 14644-1 Class 7/8 cleanroom as built


• Installation and Validation service available (recommended)


• 1800mm x 1800mm x internal clearance of 2100mm (external clearance of 2500mm required as a minimum)


• The room operates from a standard 2 amp single-phase 230v supply. 110v available upon enquiry. 


• Some electrical wiring required


• Clear acrylic ceiling for optimum light conditions 


• PVC strip side walls for easy access and flexibility


• Operates with stepped speed control from the filter unit, which allows for an excess of x 100 HEPA filtered air changes per hour


• Height adjustable stainless steel feet


• CE Marked


• Please make arrangements to offload the pallets when received

Bespoke Cleanrooms

This cleanroom is part of our modular cleanroom range, with standard cleanrooms available in assembly kit form for a fast contamination control solution.
If you need a cleanroom with a larger footprint, a lower ISO class, a different layout, or even in a different colour, contact Connect 2 Cleanrooms on +44(0)1524 812899 to discuss your project.

Rapid Room Only (Self Assembly)

• Available flat-packed for self-assembly 


• Can be assembled in up to 4 hours with 2 mechanically competent people


• Clear assembly instructions included

Validation Only 

• This cost is based on work being carried out Monday to Friday 9am to 5pm and the validation will be to ISO 14644-1:2015 standard.


• The validation will include particle counts to the ‘as built’ occupancy state and airflow readings, it will be inclusive of an interim and full validation report.


• Validation will be subject to our availability and current demand.


• Pricing is based on the location being within mainland UK, POA for other areas or if a wider scope of works is required.

Installation & Validation 

• This cost is based on 2 engineers attending site over 2 consecutive working days, Monday to Friday 9am to 5pm to carry out the installation of the cleanroom and then a validation to ISO 14644-1:2015.


• The validation will include particle counts to the ‘as built’ occupancy state and airflow readings, it will be inclusive of an interim and full validation report.


• Installation will be subject to our availability and current demand.


• Pricing is based on the location being within mainland UK, POA for other areas or if a wider scope of works is required.

Need a more bespoke solution? Visit the Connect 2 Cleanrooms website

Please ensure you are ordering correctly against your specification as these are non-returnable items, unless found faulty on receipt of order. Please call the team on 01524 813026 for support, bespoke enquiries or any further questions.